There are three mutually exclusive ways to provide power to the board:
USB-to-UART Port and ESP32-S3 USB Port (either one or both), default power supply (recommended)
5V and G (GND) pins
3V3 and G (GND) pins
Hardware Setup: Connect the board with the computer using USB-to-UART Port or ESP32-S3 USB Port. In subsequent steps, USB-to-UART Port will be used by default
Software Setup: Please proceed to Get Started, where Section Installation will quickly help you set up the development environment and then flash an application example onto your board
Package include: 2 x ESP32-S3-DevKit C N8R2 development board
