Quiescent condition: Less than 6mA
Working temperature: -40°c+80°c
Receiver sensitivity: more than -105dBm
Working frequency: 433mhz
Output voltage: DC and AC is optional
Output current: Less than 3A
Max load current: 10A
Dimensions: approx. 72*52*26mm
Remote control transmitter:
Remote Distance: 200M
Operating Voltage: DC 12V
Frequency: 433mhz
Operating Current: 13 mAh
Code Type: Fixed code / Learning code
Dimensions: approx. 58*39*14mm
Suitable battery for handsender: Button Battery
Instructions:
Press the learning code, the indicator flash, loosen your finger, press any button of the remote control, the indicator flash 2 times and off, it means you learn it successfully .
It can learn more than 12 PCS 2262 or 1527 chip with the different code wireless remote control.
remove/clean: press the learning button about 8 seconds , the indicator turn on to off, it means the information that you keep have been removed successfully.
Output working way:
Self-lock: connect the JP1 with the cutting out cap
Jog: the cutting-out cap is non-occupation, JP1 and JP2 do not connect either.
Inter-lock: Connect the Jp2 with the Cutting out cap,
Jog: press one button is ON, loosen your finger on the same button is OFF (need one channel switch and one buttons remote control).
Self -lock: press one button for one time is ON, press the same button again is OFF (need one channel switch and one buttons remote control).
Inter-lock: press one button is ON, press another button is OFF (need one channel switch and 2 buttons remote control)
Package included:
2 x Transmitter
1 x Receiver
