DDWT Table Saw Thin Rip Jig Guide for Repeat Narrow Strip Cuts Works with Table Saw Router Table Band Saw - Ultimate Version

This ultimate version extend far enough,it can reach the saw blade 8.3 inch/210mm away from the T-slot. The length fit almost all table saws,include Dewalt saw. This jig is solidly constructed and comes with the option to use it in a standard miter slot or a standard T-track slot. It slide easily into the T-slot and locks securely, firmly pressing the workpiece against the fence for clean and smooth cuts, get consistent thin strips,speeds production. You can set the dimension of your strips without having to compensate for the thickness of you saw blade. It keeps your fingers away from the saw blade, which greatly improves safety. Using the thin rip jig is very easy: 1.Slide the jig into the T-slot of your table saw,extend the bearings until they touch the tooth of the saw blade, set the dimension of your strips and lock down. (without having to compensate for the thickness of your saw blade) 2.Lock the jig a few inches in front of the saw blade. 3.Lock your fence so your stock is just touching the bearings and make the cut. 4.Repeat as needed,cutting consistent thin strips. Specification: Material: Aluminum alloy Shortest distance:2 inch/52mm Longest distance:8.3 inch/210mm Support: 3/4 x 3/8 inch miter slots(19 type), 30 type,45 type T-track slot, 50/66 type fence, 74 type fence Package Included: 1 x Table Saw Thin Rip Jig 2 x T-slot Bolts