DC-DC Boost Module Step Up Module 150W High Power Car Power Supply DC10V-32V to DC12V-35V Voltage Converter

DC-DC Boost Module Step Up Module 150W High Power Car Power Supply DC10V-32V to DC12V-35V Voltage Converter 1. Descriptions: It is a DC-DC boost module.It supports 150W high power and can easily drive 65W 90W notebook computers,including dual-core 12V batteries with ordinary 19V 3.42A notebook computers. 2.Feature: 1).It uses terminal interface,no welding. 2).Its output voltage can be adjusted by potentiometer. 3).Its conversion efficiency is as high as 94%. 4).It is widely used and can be used for notebook power supplies,DIY car power supplies,boost chargers,etc. 3.Parameter: 1).Product Name:DC-DC Boost Module 2).Input Voltage:DC 12V-32V 3).Output Voltage:DC 12V-35V 4).Output Current:6A(Max) 5).Input Current:10A(Max) 6).Output Power:100W(Max) 7).Conversion Efficiency:94% 8).No-load Current:25mA 9).Work Temperature:-25?~85? 10).Work Humidity:5%~95%RH 11).Size:65*47*3.5mm 4.Application: 1).DIY an output adjustable car power supply,you only need to connect your 12V power supply at the input,and the output voltage can be adjusted freely (14-35V),but the output voltage cannot be lower than the input voltage. 2).Car laptop power supply.The input is connected to your 12V power supply,and the output is adjusted to the voltage of your notebook to work. 3).Boost charger,you can use a 12V power supply to charge a battery higher than 12V,such as a 24V battery. 4).To supply power to your electronic equipment,as long as the voltage is adjusted to the voltage you need and the current does not exceed the rated current,it can work normally. 5).The front-end power supply of the system.When you are working on a project,the input is 10-18V,and your system board needs a power supply of about 24V,and its power is very large.The power of ordinary DC-DC modules is too small ,You can work directly on the machine without debugging,and easily achieve high-efficiency