How to set remote control:
1. Press and hold the the equipment key you want to learn on L660 until the indicator light is on, and then release. ( For example, if you are learning from your TV remote, please press the TV key. )
2. Place L660 ? the original remote head to head 1 inch.
3. Press the key you want to learn on YOUR Original Remote and L660s indicator light will flash quickly.
4. Press the CORRESPONDING key on L660, the indicator light will be on.
5. Repeat steps 3 & 4 for other keys you want to learn.
6. Press the the equipment key again to exit, and the indicator light will be off.
ONE KEY LEARNING SETTINGS ( Please note that the function only works on both remotes are the same learning remote control. ) ( Any further information regarding this function, please read the instruction clearly. )
Note: A and B are exactly the same learning remote control.
A: Remote control which has been completely learned. B: Remote control which needs one key learning copy.
-Operation Instruction of Remote Control B:
Press the device button (such as TV/SAT/DVD) and CH- button simultaneously, then the work indicating lamp will flash, and then it enters into the learning receiving state.
-Operation Instruction of Remote Control A:
1: Align the receiver of remote control A to the receiver of the remote control B;
2: Press TV (or SAT/DVD/CBL...) and CH+ simultaneously, all TV signals of remote control A have been copied from remote control B successfully when the indicator light of remote control A flashes three times before it goes out. Other pages can be copied like this.
NOTICE: 1. If the remote cannot learn but the signal light flash, please insert 2 pieces new batteries and try again.
