Blackhead Remover with Camera_20X Microscope Blackhead Suction Tool_Visible Pore Remover_ 5_0 Megapixels Facial Pore Vacuum with Charging Base Suction

 How to Connect to and Use the blackhead suction tool with camera ?     Step 1: Download “SOGWIFI” App on Android / iOS phone.     Step 2: Long press power switch for 2 seconds to turn on blackhead remover.     Step 3: Connect the WiFi Device:” FYA300A” .     Step 4: Choose a suitable probe and suction level. Make your face to lens and assure it can clearly observe facial pore. Move acne vacuum camera back and forth around the pore. Don't leave it over 3 seconds on the same pore to avoid skin bruise.     Step 5: Clean the skin vacuum with camera and keep it dry.   Please read the user manual carefully before using the nose sucker for blackheads with camera .     Please use hot towel or steamer for about 5 minutes to open your pore.     Have to do a suction test on your arm before use and start with the lowest suction level.     Please do not use more than 5 minutes each time to prevent skin damage.     It's normal that the skin will turn red after using the pore extractor with camera , please don't worry. FAQ FAQ 1: Why is it become bruise ( a red or purple seal) ? Due to the suction effect of vacuum negative pressure, redness of the skin after suction is normal. Generally, the mark will disappear automatically, or you can use ice cubes to relieve it. FAQ 2: What is the right way to use it? Move pore vacuum cleaner from one direction instead of pulling up. Stay time of one place do not exceed 3 seconds. No more than 5 minutes each clean to prevent it from hurt your skin. Note: 1. Please choose different heads size to fit different face areas. 2. Please test your skin from the lowest suction. so as to avoid to become bruise as much as possible!