Arkare WS2812B LED Strip 144 LEDs 3-3ft Individually Addressable LED Pixels Light DC 5V Programmable Dream Color Digital RGB LED Ribbon Lights Works with Arduino Raspberry Pi No Power-Controller

Technical Specs: IC type: WS2812B Light source: 5050 RGB LED LED Qty: 144 LEDs per meter (roll) 1 integrated RGB LEDs per segment, individually controllable R G B order: G/R/B; NOT R/G/B Wave length (NM): R,620~625nm ; G,515~525nm; B,465~475nm The gray level: 256 Color: 24-bit full color Beam angle:120° Voltage: DC 5V(do not exceed 6V DC) Max Current: 8.64A per meter (roll) Max Power: 43.2W per meter (roll) Protection level: Not waterproof, no weatherproof casing Dimension: 12mm (0.47") wide, 2mm (0.08") thick , 6.9mm (0.27") long per segment, 1000mm (39.37”) long per roll. Connector: 3-pin JST SM PCB color: White Life span:?50000hrs Working environment: -20?to +50? Red wire~5V+; Black Wire~GDN; Green wire~Data Kindly Note 1.Only 1x WS2812B LED strip in the package. To let it work, you need buy 5V power supply and WS2812B controller, which is not included. 2.You must use a 5V DC power supply to power these strips, do not use higher than 6V or you can destroy the entire strip. 3.If you connect more than two meters and set all the LEDs on full white, it will get orange/ red gradually. This is not quality issue but voltage drop. To solve this issue, you need to inject 5V power on both ends of the LED strip. 4.The strips are made of flexible PCB. You can gently bend it to an arc. But please NEVER rudely bend it to right or acute angle, otherwise the circuit board will crack. Package 1x 3.3ft 144 LEDs WS2812B led strip 1x 3PIN JST connector Power supply and controller are not included