Aoicrie 5Pcs Micro SD Mini TF Card Adater Reader Module Micro SDHC SPI Interface Driver Module with chip Level Conversion for Arduino R3 MEGA 2560 Due

Product description Control Interface: A total of six pins (GND, VCC, MISO, MOSI, SCK, CS), GND to ground. VCC is the power supply, MISO, MOSI, SCK for SPI bus, CS is the chip select signal pin; 3.3V regulator circuit: LDO regulator output 3.3V for level conversion chip, Micro SD card supply; Level conversion circuit: Micro SD card to signal the direction of converts 3.3V, MicroSD card interface to control the direction of the MISO signal is also converted to 3.3V, general AVR microcontroller systems can read the signal; Support Micro SD card max is 2GB, micro SDHC card max is 32GB,Please make sure the card format is FAT32 Interface level: 3.3V or 5V Power supply: 4.5V to 5.5V , 3.3V voltage regulator circuit board Currency: 0.2-200mA Communication interface: SPI With 4 holes for M2 screw , it is easy to install Technical Parameters: Size: 42*24*12mm Weight: 5g ompatible: Micro SD card (?2G), Micro SDHC card (?32G) Power supply: 4.5V~5.5V Electric current: 0.2-200mA Interface: SPI Pin Description: 6 Pins: GND, VCC, MISO, MOSI, SCK, CS CS (chip select) SCK (serial clock) MOSI (master out slave in) VCC (3.3V or 5V) GND (ground) Interface parameters: Minimum value VCC 4.5V/0.2mA Typical value VCC 5V/80mA Maximum value VCC 5.5V/200mA Best choice in various Electronic Modules & Components, DIY Parts and Tools to support your work and design challenges from Home, School to Industrial applications! Package Included: 5Pcs x Micro SD Card Module