ANMBEST Capacitive Touch Sensor Switch Module 9V 24V 30W 3A Coil Spring Switch for LED Dimming Control Hard Light Controller

Touch_S touch control module is a control module specially designed and developed for supporting various low-voltage lamps. Technical Specifications: Input voltage: 9v-24v Output voltage: 9v-24v Load power: 30W Load current: 3A Standby current: 10mA Standby power consumption: 0.1w Operating temperature: -20?~ 65? Type: Touch_S (L40W10) Size: 40mm * 10mm * 1.2mm / 1.57×0.39×0.05 inch (Note: The above parameters test conditions Vin = 12V) Default operating mode: Quick touch to switch the lamp on / off state; when it is on, long touch enters one-way dimming (hold the touch, when dimming to the highest or lowest brightness, the dimming is automatically stopped), the brightness is locked when you let go, and the brightness is switched on The brightness was locked last time. When it is off, long touch will dim the brightness from the last brightness. Effect gradient. NOTE: 1. Installation and use require installation and power on first. If the power is turned on before installation, the environmental parameters may be changed, which may affect the sensitivity. 2. When installing the touch spring, please avoid contact with complicated electromagnetic signal changes, try to avoid the use of the environment with heavy water vapor, and prevent possible malfunctions. 3. Please know the product working parameters before use, please do not use this module outside the parameters. Package Includes: 1 X DC 12v Capacitive Touch Sensor Switch Module