ANMBEST 24 Port CAT6 Patch Panel RJ45 Keystone Network Rackmount Ethernet Wall Mount Patch Panel Compatible with Cat5, 5e

1.General Introduction CAT6 Patch Panel can be applied to 1000Mbps ethernet networking. You can impact wire into 110IDC with 110impact tool or Krone impact tool convenient. Features meet FCC subpart 68 requirements, this patch panel can provide all 250MHZ bandwidth. 2.General Construction The patch panel can be mounted on any standard 483(19inch) equipment rack or communication cabinet as shown in Figure 1. The back cable management help you to arrange and tie the cable orderly and conveniently. 3.Gontent of this package One 24 port patch panel. Accessories: four screws, four cable tics. 4.Appliance Instroduction AWG 22-24 C6 cable wires are recommended for this installation, verifying the wiring follows the paster color code of the panel back cover, proper termination tools should be used(e.g.100 or Krone Universal Wire Insertion Tool). Be aware of the insertion direction for wires. When impacting the wire you must identify with the standard ASIN/TIA/EIA-56BA/B or 568B C6 permanent link conform to ASIN/EIA/TIA-568.2-1 NOTE: go together with the line originally to provide the ASNI/TIA/EIA-568B the standard card line to mark only) Cable management: Can be mounted and dismounted converniently, it make the cable arrangement very easy and vonvenient, 24 pairs holes can satisfy with your different position and type request.