Afm Safecoat Safe Seal, White 32 Oz. Can 1/Case

Safecoat® Safe Seal is a multi-use, water- based, low gloss sealer for highly porous surfaces such as par- ticle board, plywood, processed wood and porous concrete. Used primarily to reduce toxic outgassing: in particular, it is highly effective at sealing in formaldehyde outgassing from processed wood such as plywood, particle board and pressed wood. Safecoat Safe Seal is virtually odorless on application and odorless once cured. -Highly effective at sealing in toxicity of underlying surface. n Safely used by and for the chemically sensitive. -Low odor, non-offensive to installer and occupant. -Fights indoor air pollution, seals in the outgassing from the substrate. -Low VOC content, meets or exceeds all federal and state air quality regulations, including California. -Contains no formaldehyde. APPLICATION: Always have adequate ventilation. Before using, stir Safecoat Safe Seal by gently rolling container to avoid air bubbles. Then apply as is, using a sponge, squeegee or appropriate spray equipment. It is important to apply in very thin coats. Thick coats will overly darken the color of underlying surface. For best results, this product should not be reduced. Use only during low or moderate hu- midity conditions. Milky appearance, dries clear. Apply only to a completely dry substrate. Correct application will often slightly deepen color of existing surface.