Specifications:
Channel: 4 Channel
Working Voltage: DC 5V
Normally Opened Compatible Load: 10A 250VAC / 15A 125VAC / 10A 30VDC
Quiescent Current: 5mA
Maximum Current: 190mA
Trigger Current: 2 - 5mA
Trigger Voltage (LOW): 0 - 1.5V
Trigger Voltage (HIGH): 2.5 - 5V
Insulation Resistance: 100M? (500VDC)
Action Time (Under Rated Voltage): Less Than 10ms
Release Time (Under Rated Voltage): Less Than 5ms
Power Indicator (Green), Relay Status Indicator (Red)
Friendly Interface Design. All Interfaces Can Be Connected Directly Via Terminal Wiring Leads.
Module Size: 73mmX50mmX18.5mm /2.87X1.97X0.73inch(L*W*H)
Input Interface:
DC+: Connect to Power Positive (According To the Relay Voltage Range)
DC-: Connect to Power Negative
IN: Relay Module Trigger Pin (High or Low Level Trigger Optional)
Relay Output:
Normally Opened (NO) : Normally Open Pin ,NO Pin is Not Connect to COM Pin When Relay Off. NO Pin is Connect to COM Pin When Relay On
Common Pin (COM) : Common Pin of Relay
Normally Closed (NC) : Normally Close Pin , NC Pin is Connect to COM Pin When Relay Off. NC Pin is Not Connect to COM Pin When Relay On
High/Low Level Trigger:
1. Low Level Trigger When Jumper and L Short Circuit
2. High Level Trigger When Jumper and H Short Circuit
Package Contents:
2x 4 Channel 5V Relay Module with Optocoupler
