ACROBOTIC 0.96" Blue I2C 128x64 OLED LCD Display Module for Arduino, ESP8266, MSP420, STM32, 8051, Raspberry Pi LED Screen SSD1306

These displays are small, only about 1in diagonal, but very readable due to the high contrast of an OLED display. This display is made of 128×64 individual blue OLED pixels, each one is turned on or off by the controller chip. Because the display makes its own light, no backlight is required. This reduces the power required to run the OLED and is why the display has such high contrast; we really like this miniature display for its crispness! This breakout can be used with an I2C interface - selectable by soldering two jumpers on the back. The design is completely 5V-ready, with an onboard regulator and built in boost converter. It's easier than ever to connect directly to your 3.3V or 5V microcontroller or single board computer! Features: Size: 0.96in Resolution: 128×64pixels Viewing angle: greater than 160deg Power: 0.04W (low-power mode) Input voltage: 3.3V~5VDC Working temperature: –30~80°C Size: 27mm×27mm×4.1mm Driver IC: SSD1306 Communication: I2C Backlight: OLED self-lit (no backlight) Pixel Color: blue For useful guides to get you started with these OLED screens, please visit the YouTube channel. https://youtube.com/acrobotic