Module contains 8 Triacs with zero-cross detector for programming the intensity of incandescent lamps, heating elements, AC LED dimmable bulbs or fan speed controlled through a micro-controller.
Working AC voltage 80v to 240v.
Auto detect 50Hz or 60Hz.
Zero-Cross detection (with zero/cross output pin SYNC).
Compatible with any ARDUINO, RASPBERRY boards.
Low voltage side and high voltage side is completely isolated.
Dimensions of the PCB 131mm x 91mm (5.16inch x 3.58inch).
Four mounting holes diameter 3.2mm (0.13inch).
Connected LOAD current for each channel 2A long-term and 5A short-term.
NOT appropriate to change the brightness of fluorescent lamps !!!
For inductive load controlling must be connected RC snubber Dimming control via firing angle method.
Warning: This project deals with AC electricity which is dangerous if you don't know how to treat it safely.
You must treat electricity with caution!
Sample Arduino Code 1: https://goo.gl/i12KaR See video : https://goo.gl/RPjFIK
Working AC voltage 80v to 240v.
Auto detect 50Hz or 60Hz.
Zero-Cross detection (with zero/cross output pin SYNC).
Compatible with any ARDUINO, RASPBERRY boards.
Low voltage side and high voltage side is completely isolated.
Dimensions of the PCB 131mm x 91mm (5.16inch x 3.58inch).
Four mounting holes diameter 3.2mm (0.13inch).
Connected LOAD current for each channel 2A long-term and 5A short-term.
NOT appropriate to change the brightness of fluorescent lamps !!!
For inductive load controlling must be connected RC snubber Dimming control via firing angle method.
Warning: This project deals with AC electricity which is dangerous if you don't know how to treat it safely.
You must treat electricity with caution!
Sample Arduino Code 1: https://goo.gl/i12KaR See video : https://goo.gl/RPjFIK
