50W Hot Stapler Plastic Car Bumper Repair Kit Plastic Welding Machine Handy Plastics Welders Garage Tools Welding Repairing Machine Welder Gun Repair US Plug

Specifications: Important parameters: Material: ABS Input Current: 0.5A. Output Voltage: 0-50V Output Current: 0-15A Output Power: 0-50W ( With overheating protection) Power Core Plug Cable Length: 1.30m (4.3ft). Machine Size: 225 * 155 * 40mm / 8.* * 6.1 * 1.6in. Machine Weight: 498g / 1.10lb Package size: 285 * 195 * 45mm / 11.2 * 7.7 * 1.8in Package weight: 922g / 2.03lb Instruction -Connect HOT STAPLER to 110V US power supply. -The local welding temperature for the stepless adjustment, can be suitable for any thickness of the plastic material welding. -Select the appropriate type of welding nail, insert the ideal electrode mouth. -Weld the inner surface of the damaged part of the weld. -Press the start button, energize the melted plastic to weld correctly. -When melting the nails to the right position, release the button and wait a few seconds to cool the plastic. -Repeat this work step until the nails are evenly distributed and then cut the protruding parts with an oblique pliers. Note -Note that improper use will cause burns/fire hazards. -Use appropriate personal protective tools at work: heat-resistant gloves and eye protection tools to prevent spikes when cutting. -Insert the nail before making sure that the two electrodes are in a cooled state. -Do not touch the nails and electrodes during soldering. Packing List 1 * Plastics Welding Machine 50 * Flat Staple 50 * Outside Corner Staple 50 * Inside Corner Staple 50 * Waves Staple 1 * Carry Box 1 * English Instructions