4inch HDMI LCD Raspberry pi Display Module 800x480 Resistive Touch IPS Screen Wide Angle Supports Raspberry Pi 3 Model 3B plus 2 B B plus A

Features 800x480 high resolution Resistive touch control IPS technology, high quality and perfect displaying from very wide viewing angle Compatible and Direct-connect with any revision of Raspberry Pi (except the Pi 1 model B or Pi Zero, which requires an HDMI cable) Drivers provided (works with your own Raspbian/Ubuntu directly) Also works as a computer monitor, in this case, touch panel is unavailable and HDMI cable is required HDMI interface for displaying, no I/Os required (however, the touch panel still needs I/Os) Backlight can be turned off to lower power consumption FAQ Why the LCD doesn't work with my Raspbian? To use the LCD with the Raspberry Pi official image, driver should be installed first. Please refer to the user manual. However, for the first testing, you may want to use our provided image directly. Why the LCD still doesn't work with the Waveshare provided image? Make sure the hardware connection is correct and connects fine. Make sure the image in TF card is burnt correctly. The PWR will keep on and the ACT will keep blinking when the Raspberry Pi starts up successfully, in case both of the two LEDs keep on, it is possible that the image was burnt incorrectly OR the TF card was in bad contact. Which power supply should I use? It is strongly recommended to use a stand-alone 5V/2A power adapter. PACKAGE CONTENT 4inch HDMI LCD x 1 HDMI connector x 1 Touch pen x 1 RPi screws pack (4pcs) x 1 DVD x 1 Development Resources Wiki : www.waveshare.com/wiki/4inch_HDMI_LCD 100% original gurantee, technical support always available!