2.13-inch E-Ink Display HAT 250x122 Pixel Rev2 Black White Two-Color E-Paper Screen LCD for Raspberry Pi 4B 3B plus 3B 2B Zero Zero W Zero WH and Jetson Nano SPI Interface Support Partial Refresh

250x122, 2.13inch E-Ink display HAT for Raspberry Pi, SPI interface,Rev2.1 Version. This is an E-Ink display HAT for Raspberry Pi, 2.13inch, 250x122 resolution, with embedded controller, communicating via SPI interface, supports partial refresh. Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on. Features? - No backlight, keeps displaying last content for a long time even when power down. - Ultra low power consumption, basically power is only required for refreshing. - Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano. - Preserved solder pads for SPI interface, for connecting with other controller boards like Arduino/Nucleo, etc. - Onboard voltage translator, compatible with 3.3V/5V MCUs Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32). Specifications: - Operating voltage: 3.3V/5V - Interface: SPI - Outline dimension: 65mm × 30.2mm - Display size: 23.71mm × 48.55mm - Partial refresh time: 0.3s - Full refresh time: 2s - Refresh power: 26.4mW(typ.) - Standby power: <0.017mW - Dot pitch: 0.194 × 0.194 - Resolution: 250 × 122 - Display color: black, white - Grey level: 2 - Viewing angle: >170° Package Content: - 2.13inch e-Paper HAT x1 - RPi screws pack (2pcs) x1 - PH2.0 20cm x1 - CUSTOMER SATISFACTION GUARANTEED: Customer satisfaction is our top priority. It is our greatest desire and pleasure to offer you our Full Presence and Best Support - If you have any questions about our product or how to fit. You can contact our customer service, we will reply within 24 hours.