1.54 inch E-Ink Display Module e-Paper Resolution 200x200 SPI Interface for Raspberry Pi 3 2 Arduino Nucleo @XYGStudy

Overview This is an E-Ink display module, 1.54inch, 200x200 resolution, with embedded controller, communicating via SPI interface, supports partial refresh. Due to the advantages like ultra low power consumption, wide viewing angle, great effect under sunlight, it is an ideal choice for applications such as shelf label, industrial instrument, and so on. Features No backlight, keeps displaying last content for a long time even when power down Ultra low power consumption, basically power is only required for refreshing SPI interface, for connecting with controller boards like Raspberry Pi/Arduino/Nucleo, etc. Onboard voltage translator, compatible with 3.3V/5V MCUs Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/STM32) Specifications Operating voltage: 3.3V/5V Interface: 3-wire SPI, 4-wire SPI Outline dimension: 48mm × 33mm Display size: 27.6mm × 27.6mm Dot pitch: 0.138 × 0.138 Resolution: 200 × 200 Display color: black, white Grey level: 2 Refresh power: 26.4mW(typ.) Standby power: <0.017mW Viewing angle: >170° Package Contains 1.54inch e-Paper Module x1 PH2.0 20cm 8Pin x1 Note: below is the raw display: https://www.amazon.com/dp/B071S4KCTX For more details you need to know, pls firstly send me message via Amazon, I will then send attached link including User Guide for you, thank you for patience.;D