1. High-accuracy thread and tapered holes can be tightly attached to the tool.
2. The housing is treated with electrophoretic paint, making the product anti-rust even in worst environment.
3. By using anti-thrust bearing to convert key-applied torsion into superior gripping.
4. The clamping jaws are specially treated to improve wear resistance.
5. 3-16mm 1/2-20UNF: 3-16mm denotes that clamp the drill between 3mm and 16mm, and 1/2-20UNF represents a screw hole with 1/2-20UNF at the back of the chuck.
Specification:
Features:
High-accuracy thread and tapered holes can be tightly attached to the tool.
The housing is treated with electrophoretic paint, making the product anti-rust even in worst environment.
By using anti-thrust bearing to convert key-applied torsion into superior gripping.
The clamping jaws are specially treated to improve wear resistance.
3-16mm 1/2-20UNF: 3-16mm denotes that clamp the drill between 3mm and 16mm, and 1/2-20UNF represents a screw hole with 1/2-20UNF at the back of the chuck.
Specification:
Clamping range: 3-16mm / 0.12-0.63in
Package List:
1 x Drill Chuck
1 x Key
1 x 1/4 Hex Head Adapter
Note:
Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering.
2. The housing is treated with electrophoretic paint, making the product anti-rust even in worst environment.
3. By using anti-thrust bearing to convert key-applied torsion into superior gripping.
4. The clamping jaws are specially treated to improve wear resistance.
5. 3-16mm 1/2-20UNF: 3-16mm denotes that clamp the drill between 3mm and 16mm, and 1/2-20UNF represents a screw hole with 1/2-20UNF at the back of the chuck.
Specification:
Features:
High-accuracy thread and tapered holes can be tightly attached to the tool.
The housing is treated with electrophoretic paint, making the product anti-rust even in worst environment.
By using anti-thrust bearing to convert key-applied torsion into superior gripping.
The clamping jaws are specially treated to improve wear resistance.
3-16mm 1/2-20UNF: 3-16mm denotes that clamp the drill between 3mm and 16mm, and 1/2-20UNF represents a screw hole with 1/2-20UNF at the back of the chuck.
Specification:
Clamping range: 3-16mm / 0.12-0.63in
Package List:
1 x Drill Chuck
1 x Key
1 x 1/4 Hex Head Adapter
Note:
Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering.
