Specification
Item Type: Expandable Closet Tension Shelf
Material: Steel Pipe, PP
Load Bearing: 0-20KG/0-44.09lb
Application: Closet, shoe cabinet, bookcase, bathroom
How to Use:
1. Please adjust the fine tuning counterclockwise to the initial position before installation.
2. Install the non slip feet to both sides of the partition.
3. Remove the four sided spacer from the screw and insert it into the fixing screw.
4. Install the T shaped screws to the four sided spacers.
5. Measure out the installation height and draw a marking.
6. Align the laminate with the marking and press to squeeze out the air.
7. The left side of the spacer will be tightly attached to the cabinet.
8. Stretch the partition to the appropriate length of the closet.
9. Tighten the T screw to lock the length of the partition.
10. Rotate clockwise to adjust the support force of the partition until the partition is completely stable.
Package List
1 x Closet Tension Shelf
2 x Layer Bracket
4 x Foot Pad
2 x Screw
1 x Spare Spacer
Item Type: Expandable Closet Tension Shelf
Material: Steel Pipe, PP
Load Bearing: 0-20KG/0-44.09lb
Application: Closet, shoe cabinet, bookcase, bathroom
How to Use:
1. Please adjust the fine tuning counterclockwise to the initial position before installation.
2. Install the non slip feet to both sides of the partition.
3. Remove the four sided spacer from the screw and insert it into the fixing screw.
4. Install the T shaped screws to the four sided spacers.
5. Measure out the installation height and draw a marking.
6. Align the laminate with the marking and press to squeeze out the air.
7. The left side of the spacer will be tightly attached to the cabinet.
8. Stretch the partition to the appropriate length of the closet.
9. Tighten the T screw to lock the length of the partition.
10. Rotate clockwise to adjust the support force of the partition until the partition is completely stable.
Package List
1 x Closet Tension Shelf
2 x Layer Bracket
4 x Foot Pad
2 x Screw
1 x Spare Spacer
