Ziss Handheld Bidet Sprayer for Toilet Bidet Sprayer Baby Cloth Diaper Sprayer with T adapter and Bidet Hose in Bathroom

Feature: 1. The spray gun has 2 water pressure modes, which can be rotated to switch the modes, 2. The leak-proof hose with 1.5 meters long. 3. The design of the T-Valve can let the toilet and handheld bidet sprayer use water at the same time. Installation Tips: 1. Turn off the water valve. 2. Flush toilet to drain tank completely. 3. Take out exiting water pipe 4. Connect T-adapter to water supply hose. 5. Connect toilet hose to T-adapter. 6. Connect other end of shower hose to sprayer. 7. Screw wall bracket to wall or screw bracket to hook then mount on the tank. NOTE: 1. Before installing the faucet, please rinse the dirty water, residue, sand and impurities in the water pipe before installing the faucet to avoid blockage. 2. The faucet and hot and cold water pipes must be installed correctly, facing the faucet, with hot water on the left and cold water on the right. 3. Check the installation dimensions, do not install forcibly so as not to damage the product parts. 4. Use detergent to scrub the surface regularly to keep the surface clean. Do not use any abrasive cleaner, hard cloth, paper towel or steel ball, and any acidic, rough cleaner or soap. Wipe the surface of the faucet. When the bidet sprayer head is not in use, the T-valve adapter can be closed to cut off the water supply. Size: 24*17.5*6 Material: Stainless Steel Package included: 1* T-Valve (7/8"*7/8"*G1/2”, also called 15/16"*15/16"*G1/2”), 1* Sprayer 1* Explosion-proof Hose (1.5m) 1* Sprayer Holder (for wall or toilet side mounting) 1* Plumbers tape 1* Washers 2* Screws 2* Anchor