Zeberoxyz 310x310mm/12.2x12.2inch Removable PEI Magnetic Hotbed Flexible Steel Platform with PEI Surface and Flex Magnetic Bottom for Creality CR-10 Series 3D Printer Heat Bed (310x310mm)

Product Specification: Product Name: 310x310mm/12.2x12.2inch Removable PEI Sheet Magnetic Hotbed Flexible Steel Platform Thickness: about 2MM/0.08 inch Material: Made of high-quality stainless spring steel with good flatness. Product Feature: PEI Sheet Use: 1.Upgrade 3D Printer Heatbed surface, flexible, removable, can stick to magnetics very well.High strength and heat resistance 2.Compatible with PLA ABS PETG TPU and other most filaments. high temperature resistance and no deformation, attracting magnets. 3.The Polyetherimide sheet comes with 3M adhesive already laminated to the PEI. 4.Level the bed and set the height of the nozzle before printing. No glue, just tear off the protective film and print directly. 5.When the print is completed, let the bed cool,the printed model can be removed without the aid of other tools, and it can be bent back to a flat state without damaging the model. Magnetic Base: Magnetic base that is adhesive-backed for easy installation. PEI Sheet Maintenance: Clean in between prints with isopropyl alcohol and a lint free rag. Acetone can be used instead of isopropyl alcohol, but the bed must be cold if acetone is used. Optionally, light sanding with 600-1000 grit sand paper can be done after lots of printing to give the PEI sheet more life. Package Content: 1PCS 310mm PEI Spring Steel 1PCS 310mm Magnetic Sticker PLEASE NOTE: Please allow 0-1mm error due to manual measurement. Any question or problem, do not hesitate to contact us,We will reply you within 24 hours