ZANGEROI Bike Inner Tube 26x1.75/26x1.90/26x1.95/26x2/26x2.10/26x2.125 Inch Bicycle Inner Tubes Rubber Replacement Bike Interior Tire Valve Road MTB Bike Tube, 2 Tire Levers,1pcs 26" inch Bike Tube

Labeled Size: 26"x1.95-2.125 Valve Type: Schrader Valve Valve Length: 48mm (standard bicycle tire Schrader valve length) Tube Compound: Butyl Tube wall thickness: 0.90mm Packing include 2 pieces of 26"x1.9 /1.95/2.1/2.125 Schrader Valve BMX Bike Tire Inner Tubes WARM TIPS: 1.Please kindly confirm the size of your bike tire before you buy, width between 1.95-2.125 tire. If the tubes purchased are not the right size, you may return the products for a full refund. 2.When replacing your bike tube make sure to add just a little air to the tube before installing. This gives it form so it doesn't get twisted or bunch up which may cause a pinch flat. Once the new tube is installed and BEFORE fully inflating only add a few PSI to further form the tube. Inspect for an even bead of the tire to the rim on both sides. 3.Then, inflate to approximately half the desired PSI and re-inspect the tire bead to the rim again.If even beading all the way around AND on both sides then inflate to the recommended air pressure. This procedure is important because if the bead doesn't hook properly on the rim then as the inner tube is inflated it can sneak out between the tire and rim and go BOOM! 4.Never over inflate past the recommended tire pressure.