ZAITOE URCO410 3 in 1 Hard Start Capacitor Kit for Refrigerator Relay Overload Capacitor for 1/4- to 1/3 HP Compressors,Pre-Wired Capacitor URCO410 Works on"RSIR" Compressors

Specifications Capacitance: 243 to 292 MFD Maximum Continuous RLA: 6.8A Voltage (VAC):115 HP rating: 1/4 - 1/3 HP Mounting: Quick connect Works on "RSIR", "CSIR", "PSC" and "CSR" compressors Features: - Prevents low voltage starting problems - Designed for modern high efficiency compressors - For systems with or without run capacitors - Helps older compressors start and run cooler Installation Instructions: 1.Remove power supply cord from outlet. 2.Remove old relay,old overload and old start capacitor. 3.Remove wires from run capacitor 4.Push the pin terminal of the white wire onto the start terminal of the compressor(see diagram) 5.Push the pin terminal of the red wire onto the run terminal of the compressor 6.Push the black wire with the single pin terminal onto the common terminal of the compressor 7.Connect the line from the old relay to the line wire on the URCO 8.Connect the other line wire which was removed from the overload to the other line wire of the URCO 9.When connecting to systems with a run capacitor remove two insulated caps and connect the two terminals from the white and red wires to the run capacitor