ZAITOE RCO410 3 In 1 Capacitor Hard Start Kit For Refrigerator Freezers Relay Capacitor Overload Rated for 1 4 HP to 1 3 HP _115V_ Compressors Replaces HS410_ TJ90RCO410

Specifications Capacitance: 243 to 292 MFD Maximum Continuous RLA: 6.8A Voltage: 115V HP rating: 1/4 - 1/3 Mounting:Quick connect Package Includes: Relay, overload, and start capacitor. Installation Instructions: 1.Disconnect electrical power to compressor. 2.Note the locations of the start,run and common terminals on the compressor 3.Remove old relay overload and discard 4.Install white wire with pin terminal on the start terminal of compressor. 5.Install red wire with pin terminal on the run terminal of compressor. 6.Install black wire with pin terminal on the common terminal of compressor 7.Connect line wire removed from the old relay to one of the line wires(black stripped end) on the Power Supply 8.Connect the line wire which was removed from the old overload to the other line wire(black stripped end) of the Power Supply. Note: 1) This device can only be used on compressors having external overload protector. 2) The difference between the RCO and URCO series:The URCO has an additional set of leads to accommodate a run capacitor.