YWLRONG Replacement for Xiaomi Redmi 9A/Redmi 9C/Redmi 9C NFC/Redmi 9AT Screen Replacement Touch Screen Digitizer Assembly with Kit(Black)

Tips for screen replace:
Before installation
1. Disconnect the battery cable before installation or make sure your phone is powered off;
2. Make sure phone has been upgraded to the latest version
During installation
1. Please mark each screws place and put the screws you removed on the right place. Due to the different length and size of screws, if put them in wrong screw holes, they may damage the screen;
2. Treat flex cables gently, use tools instead of your finger;
3. Make sure the flex cable is properly connected .Don't force the connector together until they are properly lined up;
After installation
1. Reboot: Hold buttons (Home, Up volume, and Power button) untill the phone switch down and then switch up again;
2.If you meet with some issues, please try this: Power off your phone,disconnect all the cables including the battery cable,clean the connector on the motherboard,reconnect the cables, leave the phone alone for a while in a dry environment, a hard reset of your phone,power on.
Package:
1* LCD Screen Replacement for Xiaomi Redmi 9A/Redmi 9C/Redmi 9C NFC/Redmi 9AT
1*Set Tools