Voice-activated digital LED alarm clock, a simple and elegant digital product made of fiber density board.
Introduction:
A.Time setting: (please refer to the manual)
B.Date and alarm settings
C.dP-1. dP-2, two mode conversions
D. Power saving mode: SD function (please refer to the manual)
* Temperature display setting: The default temperature display unit is (degrees Celsius). You can also switch to Fahrenheit. (please refer to the manual)
* Voice control function: The word function can only be used in the power saving mode.
* Anti-interference function: In the power-saving mode, in order not to disturb other people, just tap the top of the alarm clock to activate the alarm display.
* Reset Button: When the operation is abnormal, the RESET button restores the factory settings after the power is turned off.
Electrical Parameters:
* Power adapter requirements: input voltage: AC110V~AC240V, 50 / 60HZ.
* Output voltage: DC5V / 500MA~1000MA.
* Select battery power requirement: AAA * 4 battery standby.
* In voice control mode, when the close sound is greater than 60 decibels, the display can be woken up.
* Working temperature: 0°C~ + 50°C
Note:
* Please use in dry and ventilated environment, pay attention to moisture, not bumpy, high temperature; be careful not to drop to avoid damage.
* When using this product, if the display is dark or flickering, the battery is low and the battery should be replaced. Prevent battery leakage and prevent damage to the product.
* If the normal running time cannot be maintained during a power failure, check if the internal battery (model: CR2032) is exhausted. Please replace the internal battery in time.
* Use the product power adapter 5V / 500MA ~ 1000MA, the output plug matches the product socket.
