YRDQNCraft Bias Tape Foot Binding Binder Sewing Presser Foot Fit Low Shank Snap on Singer Brother Janome Babylock Elna Simplicity and More

It helps you to easily produce edges with a rolling width of less than 7 mm, with straight, curved or decorative stitches. 1. Before installing the presser foot, insert the piping strip into the guide groove of the presser foot, ensuring that the fabric edge of the piping is aligned with the guide groove of the presser foot. 2. pulling the piping strip from the back of the presser foot. 3. Installation of presser feet. Adjust the needle position until the needle drop point is at the edge of the rolled edge. Tip: If the needle cannot be adjusted to the right position on the rolled edge, you can loosen the screw on the presser foot and move the adjustment guide slot left and right.