YoungRC Flysky FS R6B 2 4Ghz 6CH RC FS R6B Receiver for FlySky TH9X FS CT6B FS T6 Transmitter Remote Control Parts

Specification: Item Name: FS-R6B receiver Channels: 6 channels Model Type: Fixed-Wing/glider/ helicopter RF Range: 2.4055-2.475GHz RF Channel: 140 RF Receiver Sensitivity: -105dBm Bandwidth: 500KHz 2.4GHz System: AFHDS Modulation Type: GFSK Power: 4.0-6.5V DC Antenna Length: 26mm Weight: 13g Size: 52*35*15mm i-BUS Port: No Data Acquisition Port: No Color: Grey (Transparent) Certificate: CE0678, FCC The supplied transmitter and receiver are already bound at production time so you don’t need to do it. If you are using another transmitter or receiver, you have to first bind them before use as described below: 1. Install batteries in the transmitter and turn it off. 2. Connect the binding jumper to the battery port of the receiver. 3. Connect the battery of the receiver to any channel power supply. The red LED with blink indicating that it is in binding mode. 4. Press and hold the bind key of the transmitter and turn it on. 5. The red LED of the received should stop to blink meaning a successful binding. 6. Disconnect the receiver battery. 7. Turn off then back on the transmitter. 8. Connect all the servos to the receiver and then connect its battery. 9. Check if all servos are working as expected. 10. If anything is wrong, restart this procedure from the beginning. Package Included: 1x FS-R6B receiver