YOTINO Original Extruder Assembled MK8 Hot End Kit for CR-10 CR-10S S4 S5 CR10MINI with Aluminum Heating Block 1-75mm 0-4mm Nozzle

[Upgrade Version] YOTINO Original 3D Printer Extruder All Metal Assembled MK8 Hot End Kit Incredible Replacement for CR-10 CR-10S CR-10S4 CR-10S5 CR10MINI Features: ?100% brand new and high quality. ?9 cooling fins on MK8 extruder Hotend heatsink provide better heat distribution, extending the life of hot end ?MK8 Extruder Hot End kit, white wire was temperature thermistor, red wire was heating tube 12V 40W. ? MK8 hotend works great, and heat really fast (I usually get up to 200C in less than a minute-and-a-half to two minutes). Pre-insulated, helping to retain a steady temperature . ? Creality cannot support to add auto level sensor, cause auto level sensor cannot detect glass plate, it can detect metal material. You will make it running well after some bed leveling. Warm Tips: Why are they unterminated? 1. Connector is not strong enough to hold during the printing process. 2. Connector will be increased resistance at the connection. 3. Connector on the hotend cables is NOT meant to handle the amps needed. You will at best melt them and at worst start a fire. Specification: Material: Aluminum & Stainless Steel & Brass Installation type: external thread connection Scope of application: 3D printer Nozzle size: 0.4mm Throat pipe length?30mm Aluminum block size: 20 mm x 20 mm x 10 mm Operating temperature range: -40 ~ +260°C (-40 ~ +500 °F) Thermistor and heater cable length: 1M Package Included: 1x Aluminum Block 1x Heating Tube (1 m long, 12V 40W) 1x 1.75mm 0.4mm Brass Nozzle 1x M6*30mm Throat Pipe (built-in Teflon) 1x Thermistor + Brass Sleeve (1 meter long)