Yohii Stepper Motor Nema11 50mm 0.6A 14oz.in 4 Lead 3D Printer Hobby CNC Bipolar Stepper Motor

Model No. : 28HS5006A4;Frame Size : 28 x 28mm (Nema 11);Step Angle : 1.8° Motor Length : 50 mm/2"" Cable Length :60cm /1.96ft Mouting Hole Dia : 3mm/0.12"" Under normal circumstances, the system must be configured to at least three mechanical switches. This is high torque Nema 11 stepper motor with 1.8 deg, 2 phase.High Step Accuracy and Resolution. Low Vibration and Noise.Can be Customized for Winding Current, Shaft Options, Cables and Connectors Connection: Black(A+), Green(A-), Red(B+), Blue(B-) Attention: * As a stepper motor, it should connect to a constant current or chopper driver. Connecting the motor directly to a power supply will destroy the motor. * To choose a driver, please make sure the driver's output current not higher than motor rated current * Please take care of four wires coils order when you connecting to driver, or it will damage your driver. * Make sure the motor connect to a constant current or chopper drive controller before you test motor; Connecting the motor directly to a power supply will destroy the motor.