Fits the following vehicles:
For Chrysler 300 2012-2016 W/Rubber Stem Snap-in Sensor
For Chrysler 300 2011
For Chrysler Town & Country 2011-2016
For Dodge Challenger 2010-2016 W/Rubber Stem Snap-in Sensor
For Dodge Charger 2012-2016
For Dodge Charger 2010-2011 W/Rubber Stem Snap-in Sensor
For Dodge Durango 2011-2016
For Dodge Grand Caravan 2011-2016
For Dodge Journey 2011-2016
For Dodge Ram 4500HD 2012-2013
For Dodge Ram 5500HD 2012-2013
For Dodge Ram Series Pickup 2011-2013
For Dodge Ram Series Pickup 2010-2011 W/Rubber Stem Snap-in Sensor
For Fiat 500 all Models 2012-2016
For Jeep Grand Cherokee 2011-2016
For Jeep Wrangler 2013-2018 (433 MHZ only)
For Mitsubishi Lancer 2011-2013 W/Alloy Wheels
For Mitsubishi Outlander 2011-2013 W/Alloy Wheels
For Volkswagen VW Routan 2011-2012
Color: Black
Frequency: 434MHz
Placement on Vehicle: Left, Right, Front, Rear
Part Number: 56029398AB, 68142397AA, 68241067AA, 68241067AB, 68406537AA 5S12948 974043 974302 TX-S033R
Package: 4 x Tire Pressure Sensor
Important Notes: 1.This tire pressure sensor has been programmed in advance, no need to reprogram, just trigger it with tpms scan tool. 2.Please DO NOT attempt to start a sensor replacement job if your scan tool or OBD diagnostic tool cannot detect our sensor to display information such as Real ID,Pressure, Frequency, battery status
The TPMS sensor matching process via DIC 1.Set the parking brake.
2.Turn the ignition to ON/RUN with the engine off.
3.Use the MENU button to select the Vehicle Information menu in the Driver Information Center (DIC). 4.Use the thumbwheel to scroll to the Tire Pressure Menu item screen.
5.Press the SET/CLR button to begin the sensor matching process. A message requesting acceptanc
Part Number: 56029398AB, 68142397AA, 68241067AA, 68241067AB, 68406537AA 5S12948 974043 974302 TX-S033R
Package: 4 x Tire Pressure Sensor
Important Notes: 1.This tire pressure sensor has been programmed in advance, no need to reprogram, just trigger it with tpms scan tool. 2.Please DO NOT attempt to start a sensor replacement job if your scan tool or OBD diagnostic tool cannot detect our sensor to display information such as Real ID,Pressure, Frequency, battery status
The TPMS sensor matching process via DIC 1.Set the parking brake.
2.Turn the ignition to ON/RUN with the engine off.
3.Use the MENU button to select the Vehicle Information menu in the Driver Information Center (DIC). 4.Use the thumbwheel to scroll to the Tire Pressure Menu item screen.
5.Press the SET/CLR button to begin the sensor matching process. A message requesting acceptanc