YEUXCORP Dent Removal Tool Kits for Auto Body Hail Damage Remover Paintless Dent Repair Slide Hammer TBar Dent Puller Tool Sets 16pcs Dent Repair Pulling Tabs…

KIT INCLUDES: 1 x slide hammer dent remover tool 16 x sizes of dent removal tabs 1 x rubber hammer metal tap down pen with 8 heads 1 x rubber shovel 1 x empty alcohol bottle 1 x black clean cloth 1 x Instructions 5 x hot melt sticks ?Note: No hot melt hot melt gun included, we suggest using 20W hot melt gun and hot melt sticks to work with this dent repair tool. The alcohol bottle is empty. You need to bring your own alcohol because it can't go through security? BRIDGE DENT PULLER INSTRUCTIONS 1.Clean damaged surface with a damp clean cloth. 2.Slide one hot melt stick into the hot melt gun and pre-heat hot melt gun for 5 minutes. 3.Match the reair tad with the size of dent. Largest dents require the large pad. 4.Apply a generous amount of hot glue from the hot melt gun on the selected pad covering the entire surface of the pad. Be sure all 4 holes are covered. 5.Immediately place pad in the center of the dent and hold until it sticks by itself. Let it dry approximately 8 minutes. 6.Use the slide hammer pull up the dent. 7.Repeat process until dent is level with surface. 8.In the unlikely event that glue stays on metal surface carefully peel off by hand. TROUNLESHOOTING ?Note: not all dents 100% repairable? 1.If the dent does not come up completely, repeat the process until you achieve desired results. 2.If the vehicle has cracked or chipped paint, applying glue and pulling the dent up may cause additional paint to come off. 3.If the glue residue is left on the vehicle or pad you may use isopropyl alcohol to remove all glue.