Yeeco Buck Converter DC DC Step Down Voltage Converter 7 36V to 2 32V 10A 150W Adjustable Voltage Regulator Volt Transformer Board Power Supply Module with LCD Display and Protective Shell

Specification: Output voltage: 1.5-35V (continuously adjustable, only for the use of buck module, the input must be greater than the output 1.5V or more) Output current: the maximum 10A, can adjustable (recommend to use within 8A, more than 5A or 70W, had better to strengthen the heat dissipation. recommend to install a small fan at the input. The constant current output voltage over 2V or more can be adjusted, the current regulation only in the constant current state can work) Output power: maximum 150W (recommend to use within 100W. the use of large pressure, please reduce power) Operating temperature: -20 ~ +75 degrees (when over the temperature, please strengthen the heat dissipation) Input reverse protection: No Short-circuit protection: Yes Operating frequency: 3000KHz Conversion efficiency: up to 95% Installation: 8 copper pillars, 8 screws of 3mm Output anti-reflux: No, please add a diode when charging Wiring method: Wiring terminal or welding terminal, IN is input, OUT is output Module size: 80*53*35mm (L*W*H) Weight: 132g Setting Description: 1. F-0 mode: display the output voltage; 2. F-1 mode: display the input voltage; 3. F-2 mode: alternating display input and output voltage; Applications: 1. Used as an ordinary step-down module with over-current protection 2. Use as a battery charger 3. As a constant current LED driver module etc