10Pcs remote control key fobs, button slide cover, handy key chain size, this is a fixed frequency remote cloner for copying common fixed and learning code.
Specifications:
Material: Plastic
Color: Black & Silver
Operating Frequency: 433(433.92)MHz
Rated Voltage: 12V
Cell: 10 x CR2016 (included)
Package Weight: 255g / 8.99ounces
Package Size: 150 * 50 * 50mm / 5.91 * 1.97 * 1.97in
How to Program:
Because the fob has code when it was produced, so you need to reset it before copying.
Reset:
Hold buttons A and B down simultaneously, once the LED is flashing continuously, release both buttons to complete the reset.(If your remote hasn't have button A or B, just press the two buttons)
Copy:
Hold down the button on the remote you want to copy while simultaneously pressing and holding which button you want to program on the new fob (A, B, C, D etc.).?Both your remote and new remotes head should close to each other?
The process will be complete with the fob light flashes.
s:
If you reset the code that you had copied and want to recover, press buttons C and D (or the bottom two buttons) until light flashing.
Notice:
If done correctly, can use directly. If not, or individual button not useful, please turn to and copy again, notice the chitche of light during operation. If problems still exist after attempting several times, check the chip and frequency of remote control again, and contact us.
Packing List:
10 * Remote Control Key Fobs
Specifications:
Material: Plastic
Color: Black & Silver
Operating Frequency: 433(433.92)MHz
Rated Voltage: 12V
Cell: 10 x CR2016 (included)
Package Weight: 255g / 8.99ounces
Package Size: 150 * 50 * 50mm / 5.91 * 1.97 * 1.97in
How to Program:
Because the fob has code when it was produced, so you need to reset it before copying.
Reset:
Hold buttons A and B down simultaneously, once the LED is flashing continuously, release both buttons to complete the reset.(If your remote hasn't have button A or B, just press the two buttons)
Copy:
Hold down the button on the remote you want to copy while simultaneously pressing and holding which button you want to program on the new fob (A, B, C, D etc.).?Both your remote and new remotes head should close to each other?
The process will be complete with the fob light flashes.
s:
If you reset the code that you had copied and want to recover, press buttons C and D (or the bottom two buttons) until light flashing.
Notice:
If done correctly, can use directly. If not, or individual button not useful, please turn to and copy again, notice the chitche of light during operation. If problems still exist after attempting several times, check the chip and frequency of remote control again, and contact us.
Packing List:
10 * Remote Control Key Fobs
