Xinner 2Ton (4000lb) Scissor Jack Steel Universal Stabilizer Leveling Repair Tool Rust-Resistant for Car Truck Vehicles

Feature: The scissor jack, with tooth gears, can extend from 85 mm(close position) to 385mm, more than enough to lift most vehicles. Easy to operate using the chromed crank with speed handle. Minimum height: about 85MM Maximum height: approximately 385MM Lifting: 2T Color: Black Material: Steel Net weight: 2.1KG Item Size: 35*8.5*8.5 CM OPERATING INSTRUCTIONS 1. Insert the jack handle into the hole of the handle socket. 2. Make sure that the saddle is correctly positioned. To prevent damage to the jack, do not move the jack while the handle is intact in the socket. 3. To raise load, use one hand to hold the front part of the handle and use the other hand to turn at the rear and of the handle clockwise. 4. To lower load, use one hand to hold the front part of the handle and use the other hand to turn at the rear and of the handle counterclockwise slowly. CARE AND MAINTENANCE 1. When jack is not in use, lifting arm should be in full down position. 2. Always keep jack clean and keep the screw and bearings well lubricated. 3. Store the handle with care. Package Includes 1 X Scissor Jack 1 X Handle