Xiangtat Flysky FS-R6B 2_4G 6CH Receiver - Radio Model Remote Control Receiver Compatible with FS-I4 FS-I6 FS-I6X FS-T6 FS-I10 FS-GT2E FS-GT2G FS-CT6B FS-GT3B RC Transmi

Note: If you use this receiver with FS-GT2E, please switch the transmitter's system to AFHDS before matching. Flysky FS-R6B 2.4G 6CH Receiver, Radio Model Remote Control Receiver, Compatible with FS-i4 / FS-i6 / FS-i10 / FS-GT2E / FS-GT2G Specifications: Channels: 6 Channels Model Type: Heli, Airplane, Gliders RF Power: Less than 20db Modulation: GFSK Code Type: PCM Sensitivity: 1024 Low Voltage Warning: LED DSC Port: Yes Charger Port: Yes Power suppy: 5V DC (1.5V AAA*4) The supplied transmitter and receiver are already bound at production time so you don’t need to do it. If you are using another transmitter or receiver, you have to first bind them before use as described below: A. Install batteries in the transmitter and turn it off. B. Connect the binding jumper to the battery port of the receiver. C. Connect the battery of the receiver to any channel power supply. The red LED with blink indicating that it is in binding mode. D. Press and hold the bind key of the transmitter and turn it on. E. The red LED of the received should stop to blink meaning a successful binding. F. Disconnect the receiver battery. G. Turn off then back on the transmitter. H. Connect all the servos to the receiver and then connect its battery. I. Check if all servos are working as expected. J. If anything is wrong, restart this procedure from the beginning.