Specifications:
- Microcontroller: Atmel ATmega328
- Architecture: AVR
- Operating voltage: 5V
- Input voltage: 7-12V
- Flash memory: 32 KB of which 2 KB used by bootloader
- SRAM: 2 KB
- Clock frequency: 16 MHz
- Analog I / O pins: 8
- EEPROM: 1 KB
- DC current per I / O pins: 40 mA (I / O pins)
- Digital I / O pins: 22
- PWM output: 6
- Power consumption: 19 mA
- Dimensions: 0.70 "x 1.70''
Input and Output
- Each of the 14 digital pins on the Nano can be used as an input or output, using pinMode(), digitalWrite(), and digitalRead() functions.
- Some pins have specialized functions: Serial: 0 (RX) and 1 (TX). Used to receive (RX) and transmit (TX) TTL serial data. These pins are connected to the corresponding pins of the CH340G USB chip.
Package Including:
3 X Nano Board (soldered)
3 X USB Cable
- Microcontroller: Atmel ATmega328
- Architecture: AVR
- Operating voltage: 5V
- Input voltage: 7-12V
- Flash memory: 32 KB of which 2 KB used by bootloader
- SRAM: 2 KB
- Clock frequency: 16 MHz
- Analog I / O pins: 8
- EEPROM: 1 KB
- DC current per I / O pins: 40 mA (I / O pins)
- Digital I / O pins: 22
- PWM output: 6
- Power consumption: 19 mA
- Dimensions: 0.70 "x 1.70''
Input and Output
- Each of the 14 digital pins on the Nano can be used as an input or output, using pinMode(), digitalWrite(), and digitalRead() functions.
- Some pins have specialized functions: Serial: 0 (RX) and 1 (TX). Used to receive (RX) and transmit (TX) TTL serial data. These pins are connected to the corresponding pins of the CH340G USB chip.
Package Including:
3 X Nano Board (soldered)
3 X USB Cable
