Wood Flooring Installation Kit 43 Pcs Laminate Vinyl Plank Flooring Assembly Tool with Spacers Tapping BlockHeavy Duty Pull BarHigh-Strength Fiberglass Handle Mallet -Pull bar is 4mm Thick-

Note: It is recommended that you have to be careful that the tapping block is always flat on the floor so the groove of your plank is within the groove on the block so as not to damage it. Feature: All In One:Package has all the items you need to help your lay down laminate flooring or vinyl plank flooring.Plenty of spacers for long planks, nice sized tapping block and right sized mallet with a nice grip,a helpful kit for a faster and efficient laminate floor install. Rubber Hammer:the hammer included is great for tapping down the end seams for a perfect lock.There is a groove in the block that fits the tongue perfectly and is much faster than locking and unlocking a scrap piece of flooring. Pull Bar:The end piece pull bar has two felt pads on the bottom side that sits on the flooring to help prevent scratches,works great when reaching the end of the row to seat all the floor boards into each other tightly. Just slip the shorter edge against the wall on either side and hammer it from both sides to ensure they are connected. 40 Piece Spacers:The spacers can stack and stagger the spacers to create different thicknesses.They are tapered, just put two together and adjust to any width,following the instructions and you will have no issues to install vinyl flooring. specification: mallet head is 35 mm in diameter handle length is 255mm pull bar is 4mm thick and 12 inch length suitable for 0.27in (7mm) - 0.6in (15mm) laminate or hardwood flooring Package includes: 1 x rubber hammer 1 x tapping block 1 x pull bar 40 x spacers