Wireless Temperature Controller Plug, Nashone Automatic Heating & Cooling Outlet wireless Thermostat Built in Temp Sensor with Remote Control LCD Display(Black)

How To Use Step 1: Insert 2pcs AAA batteries into the remote controller Step 2: Ambient temperature detected by remote automatically (current temperature) Step 3: Select heating or cooling mode Click ON or OFF button, Heating symbol or Cooling symbol will flashing about 10 seconds and then heating or cooling mode selected successfully Step 4: Switch ?/? Press +/ON and -/OFF button together at the same time, then switch from ? to ? or from ? to ? Step 5: Switch in AC power outlet and plug your appliance into thermostat outlet, red LED indicator will blink, current temp signal from remote controller will be received after LED indicator stop to blink Step 6: Preset your target temperature in remote controller,then target temp signal transmitted to thermostat outlet Step 7: Current temperature reach target temperature, then thermostat outlet disconnect from AC power automatically and appliance stop to heat or cool, constant temperature maintained in your room Spec Max Rating: 120V/15A/60Hz/1800W Transmission Frequency: 433.92MHz Max. Range: 40m in Open Area Current Temp. Range: 0°C~60°C/32°F~140°F Target Temp. Range: 0°C~60°C/32°F~140°F Tolerance: ±1°C or ±1°F Remote Control Power: 2pcs * AAA 1.5V Batteries Note 1.The thermostat is intended for indoor use only 2.Actual use shows that heating effect is better than cooling effect 3.Reinstall batteries to change heating or cooling mode 4.To get better effect of constant temperature, please place remote controller and thermostat outlet in the same room or different rooms which have similar ambient temperature 5.Remote control distance varies according to obstacle such as wall thickness What's In The Box 1*Wireless Thermostat Outlet 1*Remote Control 1*User Manual