1. This skate?board remote control has 2.4G radio technology, strong anti?interference ability, supports three?rate mode and cruise control, and has a battery indicator light, which feels good, ABS surface injection treatment, lithium electronic rechargeable battery, and non?slip wrist strap.
2. The skate-board remote controller is equipped with a 2.4GRF receiver, which can be adapted to most ESCs, getting rid of the traditional one?matching one, and has a wider application and powerful signal.
3. This skate?board remote controller has a constant rate cruise mode, so you dont have to worry about long press fatigue and solve the uneven rate.
4. The electric skate-board remote control can be used continuously for more than 4 hours; it will automatically shut down after long?term standby; it will remind of low battery vibration.
5. This electric skate-board remote control has a streamlined layout, which is more ergonomic, easy to control, and tighter.
Specification:
Item Type: Electric skate-board remote
Material: ABS + rubber spray paint surface
Model: VX1 remote control 2.4Ghz Remote VX1 for DIY electric skate-board
2.4Ghz Bandwidth
Support 3 Rate Modes
Support Cruise Mode
Power Indicator for Remote Control and Electric skate-board
Support for Checking Remote Battery Level
Comfortable Touch: ABS + rubber painted surface
Li-ion Rechargeable Battery
Wristband
VX1 Remote Control Comes with Receiver
PackageList:
1 x Remote Control
1 x USB Cable
1 x User Manual
2 x Connection Line
1 x Module
Notice:
1. Please carefully check the following receiver wiring diagrams corresponding to different FSESCs. Wrong connection of the receiver side cable will cause the receiver to burn.
2. The variants (for VESC4/for VESC6/for non?VESC) differ just in the receiver cable, the remote control is the same.
3. When selecting the UART mode connection
2. The skate-board remote controller is equipped with a 2.4GRF receiver, which can be adapted to most ESCs, getting rid of the traditional one?matching one, and has a wider application and powerful signal.
3. This skate?board remote controller has a constant rate cruise mode, so you dont have to worry about long press fatigue and solve the uneven rate.
4. The electric skate-board remote control can be used continuously for more than 4 hours; it will automatically shut down after long?term standby; it will remind of low battery vibration.
5. This electric skate-board remote control has a streamlined layout, which is more ergonomic, easy to control, and tighter.
Specification:
Item Type: Electric skate-board remote
Material: ABS + rubber spray paint surface
Model: VX1 remote control 2.4Ghz Remote VX1 for DIY electric skate-board
2.4Ghz Bandwidth
Support 3 Rate Modes
Support Cruise Mode
Power Indicator for Remote Control and Electric skate-board
Support for Checking Remote Battery Level
Comfortable Touch: ABS + rubber painted surface
Li-ion Rechargeable Battery
Wristband
VX1 Remote Control Comes with Receiver
PackageList:
1 x Remote Control
1 x USB Cable
1 x User Manual
2 x Connection Line
1 x Module
Notice:
1. Please carefully check the following receiver wiring diagrams corresponding to different FSESCs. Wrong connection of the receiver side cable will cause the receiver to burn.
2. The variants (for VESC4/for VESC6/for non?VESC) differ just in the receiver cable, the remote control is the same.
3. When selecting the UART mode connection
