Wire Drawplate Tungsten Carbide Round Draw Plate for Jewelry Making (52Holes: 0.26-4.00mm)

Using Method ! Formula to find the circumference of a round tube: Multiply diameter by 3.1416. Depending on the size of the tube to be made, cut the sheet to the desired strip width considering the formula above. Prepare the wire by hammering, filing, rolling or swaging, to reduce it. Ensure the point is long enough so the wire can be pulled through the die with a draw tong easily. Coat the edges with Beeswax to lubricate. Secure the draw plate in a vice and draw the wire. Usually the wire requires to be drawn through several dies, allowing the wire to gradually decrease until the desired size is reached, to ensure the longevity of the die plate.