Feature:
--Static Cling
--Non-Adhesive
--Easy to install and removal
Installation Steps:
1. Measure and Clean the window
2. Cut film according to window size
3. Remove the backing film
4. Spray lots of water to window glass and film
5. Position film
6. Squeeze out bubbles and water
7. Dry with a towel
8. Enjoy your works
Tips:
This window sticker can only be used to a smooth glass surface and is not suitable for other material surfaces.
When using, the window film should be cut into the size of the glass before being attached.
There are 2 layers of window film, one transparent protect sheet, the other face film which we used.
Please spray a lot of water to glass when apply window film, otherwise there will have many bubbles or fall down easily.
Do remember to squeegee away any bubbles after you apply the film