White Oak Flat Cut Wood Veneer Sheet 6" x 12" raw no Backer 1/42" Thick A Grade

Flat Cut White Oak wood veneer sheet 6" x 12" raw no backer 1/42" thickness. Photos are representative of actual stock and several looks are shown. Orders for more than one piece will be similar. Ships flat in between thick cardboard. Other sizes, edgebanding and backed options are available. Some photos may be wet with water or finished so the effect can be seen. White Oak is a grayer color than Red Oak but can also have a hint of pink and green. Trust the experience, knowledge, and reputation that has served the wood industry and novices since 1995. About pictures : Most pictures have been temporarily wet on the lower portion of the veneer to show what the grain may look like when finish is added. Color adjustments have been made to show the color as best as is possible. It is impossible to get photos exactly correct in color, but we have made an effort to do so. Backed products come with complete application instructions that are simple and clear. For raw veneer or un-backed products, we suggest using the Internet to see what advice is available as opinions vary on the best way to handle that product. Below is general information for most of our products. Make sure you check the listing to see which applies to the above product in particular. Thickness : (will not always be exactly correct, but relatively close) Paper-backed veneers = 1/40” Wood-backed veneers = 1/25” Raw plain veneer with no backing = 1/32”-1/42” How to cut : generally cut with a razor/box knife or similar tools and some type of straight edge. How to apply : Paper-backed and wood-backed veneers are generally applied with contact cement. Raw plain veneer is applied with white or yellow wood glue and must have pressure applied while drying. How to finish : most any conventional finishing products can be used with veneer that is applied correctly. Disclaimer: Sometimes veneers have minor splits or tears in them. These are u