White htv 12"X13.3FT Heat Transfer Vinyl RollsWhite Iron on Vinyl for All Cutter MachineWhite Heat Transfer Vinyl for DIY T-ShirtsEasy Weed White htv Vinyl and Iron on Vinyl for Cricut

Packaging accessories?1 white Htv vinyl roll &1sheets Instruction Guide How to Use 1.Pay attention to the working area is clean and dust-free to avoid sticking to the transparent protective film. 2. the pattern design is completed,we need to mirror or flip the design before cutting. 3.After cut Peel off the extra part vinyl by carefully peeling it off of the backing sheet that only design left on the backing. Use weeding tool to remove smaller pieces if needed. (if the design part peeled off unfortunately don' t worry you can stick back to the correct position because it adhesive protect film) 4.Iron (important: turn off the steam) on T-shirt for 5 - 10second to wrinkle from your garment/media. 5.Put design Top on cloth and (important: turn off the steam) Iron on 30 second unmoved and 20second back and forth to full design by2-3KG press Note?(suggest iron on cotton level /140degree). Maintenance Tips Wait 24 hours before washing for the first time.For best results, wash inside out with cold water and hang to dry or tumble dry on low. First time Only use mild detergent.Do not dry clean . Do not use nylon,velvet,acrylic fabrics,leather,vinyl which will melt and ruin the material. We recommend using on cotton, Polyester, Cotton/Polyester blends, Lycra fabric for best performance. Keep away from direct sunlight,hot and humidity for storage. Note? Actual color of vinyl may vary slightly due to differences in monitor display