WHDZ Car Dent Puller, Auto Body Dent Removal Tools Kit Silde Hammer with 9 Pcs Glue Puller Tabs Glue Sticks Hail Damage Remaol Kit for Car Body Dent Repair

Was: $97.88

Now: $48.94

(No reviews yet) Write a Review

SKU:: II355536
UPC:: 714497417776
Condition:: New
Availability:: Free Shipping from the USA. Estimated 2-4 days delivery.

Current Stock:

Description

This paintless dent repair slide hammer works with all dent pulling tabs and is made with ergonomic grips for maximum pulling power. Introduce? 1.Clean the dent with a clean wet cloth; 2.Mount the glue stick into the glue gun,pull the trigger to let the glue stick enter into the glue gun, connect the power source and preheat for 5 minutes; 3.Use a proper drawing gasket. Large dent requires a large drawing gasket. (Note: The larger the drawing gasket is, the larger the drawing force is); 4. Pull the trigger and apply the drawing gasket with extruded glue (The 4 holes of gasket should be applied with hot melt glue); 5. Fast place the drawing gasket with hot melt glue at the center of dent, press lightly until the glue cures and adheres (Let the glue cool for about 8 minutes. The cooling time should be less than 10 minutes and should be shorter slightly in winter); 6. Align the T-shaped repairer and press the drawing gasket with hot melt glue, pull the sliding rod backwards to pull up the dent; 7. Check with a Line board. If dent still exists, knock it slightly with a flattening hammer or pen; 8. Clean the repaired place with a clean wet cloth. Packing include: 1- Slide Hammer Puller 5- Plastic Glue Puller Tab 4- Aluminium Glue Puller Tab 5- Glue Sticks