Wenge Pangar Composite Wood Veneer 12" x 12" on Paper Backer 1/40" Thick # 960

Pangar Wenge composite wood veneer sheet 12" x 12" with paper backer 1' x 1' x 1/40" thickness. Composite wood veneer is real wood that has been dyed and cut in a process that makes the sheets consistent and removes natural "defects" that occur in other woods. Laminates and finishes like any other veneer. Brown backer shown in one photo rolled up. Slight red cast. Pangar is just a name applied to the product. Has no real meaning. Some photos may be of a different size, customer projects, and wet or finished veneer but the product will be the same. Ships rolled in long narrow box with application instructions. Other sizes are available. Product code # 960. Trust the experience, knowledge, and reputation that has served the wood industry and novices since 1995. Visit My Store: JSO Wood Products Other backers and unbacked veneer may be available. About pictures : Most pictures have been temporarily wet on the lower portion of the veneer to show what the grain may look like when finish is added. Color adjustments have been made to show the color as best as is possible. It is impossible to get photos exactly correct in color, but we have made an effort to do so. Backed products come with complete application instructions that are simple and clear. For raw veneer or un-backed products, we suggest using the Internet to see what advice is available as opinions vary on the best way to handle that product. Below is general information for most of our products. Make sure you check the listing to see which applies to the above product in particular. Thickness : (will not always be exactly correct, but relatively close) Paper-backed veneers = 1/40” Wood-backed veneers = 1/25” Raw plain veneer with no backing = 1/32”-1/42” How to cut : generally cut with a razor/box knife or similar tools and some type of straight edge. How to apply : Paper-backed and wood-backed veneers are generally applied wi