WeldingCity Power Cable Hose Adapter 105Z57 for Air-cooled TIG Welding Torch 9 and 17 Series

TIG welding torch power cable hose adapter plug for air-cooling torch gas/electrical connection: regular Weldcraft style female-end adapter 105Z57 and Dinse-type adapters (50mm and 25mm, gas-through or separate hose). Adapter only; power cable not included. 105Z57 regular standard Weldcraft style adapter with electrical stud hole and female fittings 5/8-18 RH (to gas hose) and 3/8-24 RH (to power cable hose). Dinse-type adapter available with Dinse 50mm (0.508" dia.) and 25mm (small, 0.355" dia) with options of in-line (gas-thru) and separate gas hose for different welders. All with female receptacle 3/8-24 RH to accept 1-pcs style power cable hose 57Y01R/57Y03R and other equivalent air-cooled TIG welding torch (usually 9/17-series). For Miller welder, Dinse (50mm) plug with separate gas hose (Miller P/N 195378) or gas-thru (Miller P/N 194722) can be found in Maxstar 200/200STR/200SD/200DX&LX/250T/300, Dynasty 200, 300SD/DX/LX, Syncrowave 180SD, CST, Invision and XMT. Dinse (25mm small) gas-thru plug (Miller P/N 273483 or 195234) is for power supplies with small gas-thru Dinse connection. For Lincoln welder, Dinse (50mm) plug with separate gas hose (Lincoln P/N K960-1) or gas-thru (Lincoln P/N K1622-1) can be used in Lincoln PTA TIG torch series in welder Invertec V160-S/V205-T/V200-T/V250-S/V275-S/V300-Pro/V350-Pro, Square Wave TIG 175/275, Power Wave 355 and ALT304. Also compatible with many other brands TIG welders from ESAB, Everlast, Eastwood, AHP, etc. when working with 9 series and 17 series torches. US-based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question.