WEELPOWER Black LCD Touch Screen Digitizer Glass Replacement Assembly for iPhone SE with Repair Tool (White)

Package 1 x LCD screen replacement for iPhone 1 x repair kit iPhone,Home button and camera are not included. If your phone meet some problems like cannot turn on,touch insensitive, flash, lines on screen etc, please follow below steps: 1.Please check the LCD to make sure the flex cables are in good condition and there are no debris on the connectors. 2.Disconnect and reconnect the flex cables from the motherboard side. 3.Then Reboot: Hold buttons (Home, Up volume, and Power button) untill the phone switch down and then switch up again. 4.Make sure for iPhone IOS is upgraded to the latest version. 5.Leave the phone alone for a while in a dry environment. Sometimes there is static after installing that will go away after some time. Please leave phone alone overnight and see if this problem persists in the morning. Note: The new screen replacement have only two flex cables, you should transfer the front camera sensor flex cable and finger sensor flex cable from your old screen, so total four flex cables.Please contact us without hesitate when have any problem before returning this item, as long as the item cannot work, refunded is supported.