Waveshare 5 Inch HDMI LCD 800X480 High Resolution for Raspberry Pi 2 Model B Raspberry Pi Model B B A Raspberry Pi 3 Model B 3 B plus

Features
800×480 high resolution, touch control
Directly-pluggable into any revision of Raspberry Pi (only except the first generation Pi model B which requires an HDMI cable)
Driver provided (works with custom Raspbian directly)
HDMI interface for displaying, no I/Os required (however, the touch panel still needs I/Os)
Back light control to lower power consumption
High quality immersion gold surface plating
Package Contains
5inch HDMI LCDx1
HDMI connector x 1
Touch pen x1
RPi screws pack (4pcs) x 1
DVD x 1
Why the LCD doesn't work with my Raspbian?
--To use the LCD with the Raspberry Pi official image, driver should be installed first. Please refer to the user manual.
--However, for the first testing, you may want to use our provided image directly.
Why the LCD still doesn't work with the Waveshare provided image?
--Make sure the hardware connection is correct and connects fine.
--Make sure the image in TF card is burnt correctly.
--The PWR will keep on and the ACT will keep blinking when the Raspberry Pi starts up successfully, in case both of the two LEDs keep on, it is possible that the image was burnt incorrectly OR the TF card was in bad contact.
For more info, please check the wiki page: www.waveshare.com/wiki/5inch_HDMI_LCD?amazon